Skip to content
Trace Metrix

Building monitoring guide

Relative humidity vs material moisture: what each reading tells you

A high humidity reading in a room does not mean the wall is wet, and a dry-feeling room does not mean the wall is dry. The two measurements answer different questions.

By Trace Metrix · Building investigation and monitoring

The short answer

Air and materials are measured differently.

Relative humidity describes the air. Because warm air can hold more water vapour than cold air, the same amount of moisture gives a lower RH in a warm room and a higher RH beside a cold surface. Read RH together with temperature.

Material moisture describes what is inside the wall, floor or timber. A room sensor cannot tell you that directly. Our deep-set humidity sensor measures humidity inside the wall and can confirm moisture at that point.

Neither reading diagnoses a cause on its own. They give evidence that supports the investigation alongside inspection.

A surveyor scanning an internal wall for moisture.
Checking a wall during a Trace Surveys damp investigation.

Side by side

Three readings, three questions.

ReadingWhat it isWhat it describesKeep in mind
Relative humidity (RH)How close the air is to saturation at its current temperature, as a percentage.Room or local air around the sensor.Changes quickly with heating, ventilation, weather and occupancy.
Deep-set humidityHumidity measured at a point inside the wall, rather than in the room.Conditions at that point in the material.Can confirm moisture at that point; it does not describe the whole wall.
Material moistureHow much moisture a material such as timber or masonry holds.The material itself, using a method suited to it.Usually changes more slowly than room air.

Using them together

Questions worth asking.

Readings are reported at a user-defined interval, set to 15 minutes as standard, so patterns over days and weeks become visible.

Tell us what you need to understand.

Tell us what you need to understand about a wall, floor or room. We can discuss which measurements will help.

Discuss a monitoring project