Skip to content
Trace Metrix

Sensors

The right measurements for your building.

Start with the question you need to answer. We are developing a modular sensor platform with removable probes and a common hub, beginning with temperature and relative humidity.

Off-the-shelf solutions

Ready-made monitoring, available now.

Ask about a solution
A black wall-mounted sensor with a wired probe beside interior wall panelling.
Wall-mounted sensor and wired probe.
A person positioning a black sensor and wired probe against a column.
Positioning a sensor and probe.

How it fits together

Temperature and humidity monitoring: node, hub and dashboard.

  1. 01

    Node

    A small wireless unit placed where the measurement is needed. A removable probe on the node takes the reading.

  2. 02

    Hub

    Collects readings from nearby nodes and passes them to the dashboard. Our developed 4G hub provides connectivity where client Wi-Fi is unavailable.

  3. 03

    Dashboard

    Where the readings are organised by site and device, reviewed over time and prepared for a report.

Hardware architecture in development

Planning your monitoring

A useful reading starts with a useful location.

Agree the building question before choosing the measurement points. An air reading, a surface reading and a reading at a probe access point describe different conditions; record where each measurement is taken so comparisons have context.

Read the damp and condensation monitoring guide

Where to place temperature and humidity sensors

Relative humidity vs material moisture

See the sensors in use at a Network Rail station

Measurements

What each measurement helps you explore.

  • Ambient temperature & RH

    What it helps you explore
    Changes in surrounding air
    Status
    Initial development focus
  • In-material temperature & RH

    What it helps you explore
    Local conditions at a suitable probe access point
    Status
    In development
  • Surface temperature

    What it helps you explore
    Surface conditions alongside ambient readings
    Status
    In development
  • Additional trial measurements

    What it helps you explore
    Water detection and differential pressure
    Status
    Experimental
  • Resistance-based moisture

    What it helps you explore
    Possible future material measurement configuration
    Status
    Planned

Relative humidity is not a direct measurement of material moisture content. The measurement method and probe position matter.

Frequently asked questions

Planning a monitoring project.

No. We have developed a 4G hub for places where Wi-Fi is not available, so monitoring does not have to rely on the client's Wi-Fi. Sensor readings pass through the hub to the dashboard. Check 4G coverage at the proposed site when planning the installation.

Choosing measurement points? Read our sensor placement guide.

Availability

Tell us the measurement you need.

Tell us the measurement you need, where it needs to be taken and how long you need to monitor. We can discuss a suitable approach and current availability.

Tell us what you need to understand.

Discuss a monitoring project